Features BL6212 BL6212*
Improved PSRR at 217 Hz & 1 KHz 62 dB
Power output at 5.0V, 1% THD+N, 8Ω 1.28 W (typ.)
Power output at 3.0V, 1% THD+N, 8Ω 440 mW (typ.)
Ultra low shutdown current 0.1 uA (typ.)
2.2V – 5.5V operation
Improved circuitry eliminates pop-click noise during turn-on and turn-off transitions
No output coupling capacitors, snubber networks or bootstrap capacitors required
Unity-gain stable
External gain configuration capability
Available in space-saving packages: MSOP8, 9 Bump WLCSP
General Description BL6212 BL6212*
The BL6212 is a Class-AB audio power amplifier designed for mobile phones and other portable communication devices. It is capable of delivering 1.28 watts of continuous average power to an 8Ω BTL load with less than 1% distortion (THD+N) from a 5VDC power supply.
The BL6212 was designed specifically to provide high quality output power with a minimal amount of external components. It does not require output coupling capacitors or bootstrap capacitors. And with ultra low shutdown current, the BL6212 is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.
With special pop-click eliminating circuit, the BL6212 provides perfect pop-click characteristic during turn-on and turn-off transitions.
The BL6212 is unity-gain stable and can be configured by external gain-setting resistors.
Applications
Wireless handsets
Portable electronic devices
PDAs, Handheld computers